Product Instruction


Triple Action Whitening Light System

Brush your teeth, and then use a tissue to blot the surface of teeth dry. Use the ampoule to combine and apply the liquid formulas to teeth as shown below. Be sure each tooth is thoroughly coated.

  • UNCAP

    Uncap the ampoule to expose the applicator tip.

  • SQUEEZE

    Hold the ampoule with the applicator tip facing down. Squeeze dots marked 1 and 2 in that order to POP the two inner capsules and blend the formulas. Continue to squeeze the ampoule gently until the applicator tip is fully saturated before you apply the liquid to the teeth.

  • APPLY

    Apply by rubbing the newly blended formulas in an even layer onto teeth in a circular motion.

Immediately after applying the liquid mixture from the ampoule, use the light to accelerate its whitening power.

  • PRESS

    Turn the light on by pressing the "G" button at the center.

  • PLACE & HOLD

    Position device in mouth with lips around mouthpiece and light in front of teeth. Hold the device to aim the light straight onto teeth with your head upright. Keep device in place until timer beeps (about 10 minutes).

  • REPEAT

    After the device beeps, IMMEDIATELY REPEAT STEPS 1 and 2 for two more cycles, for a total of 3 full cycles of DOUBLE ACTION WHITENING AMPOULE + LIGHT. (Allow around 40 minutes to complete the entire whitening process.) Do not eat, drink or rinse for 20 minutes.





Smile Whitening Light System

Fast and Easy Directions

Step 1: Apply Smile Whitening System to teeth (approximately 2 minutes).
Step 2: Shine Smile Whitening Light on teeth until it beeps and shuts off (10 minutes). Repeat twice, for a total of 3 cycles. Your teeth will be whiter in less than 40 minutes.

Step-by-Step Directions


Use a tissue to blot dry the surfaces of teeth. Use the ampoule to rub the serum into teeth as shown below.

  • FLIP

    Remove ampoule from paper sleeve, flip it over and reinsert with applicator tip pointing outwards. Don't forget to reinsert the clear ampoule into the white paper sleeve!

  • POP

    With applicator tip pointing down, squeeze until the inner tube pops and tip is saturated with serum. Make sure the applicator tip is pointing down and soaked – almost to the point of dripping – before applying.

  • WHITEN

    Apply to each tooth's surface, in a circular motion. Squeeze and apply until empty. Continue to squeeze the ampoule to move the serum out through the tip as you go!

FOR BEST RESULTS:

  • As you use the ampoule, spend several seconds rubbing the serum into each tooth, and spend more time on teeth that are more discolored.  Use the edges of the applicator to get into the ridges between teeth.  Keep serum on teeth and away from gums as much as possible.
  • Continue to squeeze the ampoule, with the paper sleeve ON, to keep the serum flowing as you apply!

Right after applying the whitening serum, use the light to accelerate its whitening power.

  • PRESS

    Turn the light on by pressing the "G" button in the center.

  • PLACE & HOLD

    Position the device in mouth with lips around the mouthpiece, and light in front of teeth. Keep device in place until timer beeps.

  • REPEAT

    After the device beeps, repeat Steps 1 and 2 for a total of 3 cycles. Do not restart the light without a fresh application of whitening serum on your teeth.

FOR BEST RESULTS:

  • Before you place your lips around the mouthpiece, glance quickly to make sure light is activated.  Do not look directly into light source.
  • When the device is in your mouth, rest upper teeth on lower teeth without overlapping to make sure all surfaces are exposed to the light.
  • It is safe to swallow any excess saliva as you use Smile Whitening Light, but you may wish to spit between whitening cycles.
Cleaning Instructions: To clean and disinfect Smile Whitening Light, detach the mouthpiece from the light device. Wash the mouthpiece with warm water and soap, or soak in mouthwash to remove saliva and bacteria. DO NOT immerse the light device in water. Use an antibacterial wipe to clean device and lens over the light source.
Double Action Whitening System

 

  • UNCAP

    Uncap the ampoule to expose the applicator tip.

  • SQUEEZE

    Hold the ampoule with the applicator tip facing down. Squeeze dots marked 1 and 2 in that order to pop the two inner capsules and blend the formulas. Continue to squeeze the ampoule gently until the applicator tip is fully saturated before you apply the serum to teeth.

  • WHITEN

    Whiten by applying the newly-blended formulas evenly onto teeth. Do not drink, eat or rinse for at least 20 minutes.

Speed Whitening System

Fast and Easy Directions

Step 1: PRIME: PRE-WHITENING AMPLIFIER GEL
Step 2: WHITEN: SMILE WHITENING AMPOULE

Step-by-Step Directions


Brush your teeth, and then use a tissue to blot the surface of teeth dry. Apply a thin, even layer of Pre-Whitening Amplifier Gel to each tooth.

  • PINCH

    Squeeze tube firmly at dotted line.

  • DETACH

    Bend the stick gently back and forth until the seal snaps open. Be sure not to break the stick that goes down into the tube.

  • PULL

    Remove swab from tube.

  • APPLY

    Paint a thin, even layer of gel onto teeth with swab. Re-dip the swab into the tube as necessary to ensure that gel is applied on all tooth surfaces.

FOR BEST RESULTS:

  • Use the swab tip to spread a thin layer of gel onto the surfaces of teeth.  The gel is a bit thick, but you only need a little bit to accelerate the whitening serum you rub into your teeth in Step 2.

Immediately rub the Smile Whitening Ampoule serum onto teeth in a circular motion (approximately 2 minutes). Be sure each tooth is thoroughly coated. Allow to dissolve naturally - do not eat, drink, or rinse for at least 20 minutes.

  • FLIP

    Remove ampoule from paper sleeve, flip it over and reinsert with applicator tip pointing outwards. Don't forget to reinsert the clear ampoule into the white paper sleeve before squeezing!

  • POP

    With applicator tip pointing down, squeeze until the inner tube pops and tip is saturated with serum. Make sure the applicator tip is pointing down and soaked – almost to the point of dripping – before applying.

  • WHITEN

    Apply to each tooth's surface, in a circular motion. Squeeze and apply until empty. Continue to squeeze the ampoule to move the serum out through the tip as you go!

FOR BEST RESULTS:

  • Use morning and night, after brushing your teeth.
  • After you have used the ampoule, wait at least 20 minutes before eating or drinking so the serum stays on teeth. The longer it stays on the teeth, the greater the whitening result.
  • As you use the ampoule, spend several seconds rubbing the serum into each tooth, and spend more time on teeth that are more discolored. Use the edges of the applicator to get into the ridges in between teeth. Keep serum on teeth and away from gums as much as possible.
  • Try to keep squeezing the ampoule in the same place, at the blue "HERE" oval, to get as much serum out as possible.
  • It is safe to swallow any excess saliva as you apply the serum.
  • You may achieve better results if you refrain from drinking or eating dark or acidic food and beverages (such as coffee and orange juice) throughout your whitening treatment.
Smile Whitening System

With the GO SMILE ampoule, you can easily and quickly achieve a brighter, more beautiful smile.  Our patented Ampoule Technology delivery system makes whitening your teeth beautifully simple….FLIP, POP, WHITEN!

  • FLIP

    Remove ampoule from paper sleeve, flip it over and reinsert with applicator tip pointing outwards. Don't forget to reinsert the clear ampoule into the white paper sleeve!

  • POP

    With applicator tip pointing down, squeeze until the inner tube pops and tip is saturated with serum. Make sure the applicator tip is pointing down and soaked – almost to the point of dripping – before applying.

  • WHITEN

    Apply to each tooth's surface, in a circular motion. Squeeze and apply until empty. Continue to squeeze the ampoule to move the serum out through the tip as you go!

*The longer the serum stays in direct contact with your teeth, the more effective the System will be for you.

FOR BEST RESULTS:

  • Before using the ampoule, clean the surface of the teeth by brushing gently.  Blot teeth with a tissue or towel to minimize saliva, which can dilute the serum.
  • Rub the saturated applicator tip evenly over all visible tooth surfaces to distribute the serum evenly.  Then, go back and scrub each tooth, one by one, in a circular motion.
  • Spend several seconds working the serum into each tooth, and spend more time on teeth that are more discolored.  Use the edges of the applicator to get into the ridges between the teeth.  Keep serum on the teeth and away from gums as much as possible.
  • Slide back the paper sleeve and peek into the ampoule to see if there is any serum left.  Make sure you use all the serum!
  • After you use the ampoule, wait at least 20 minutes before eating and drinking so the serum stays on teeth.  The longer it stays on the teeth , the greater the whitening result.
  • You may feel some sensation on your gums or lips from the serum.  For most people, the sensation isn't uncomfortable. If your teeth and gums are sensitive, you may feel a little more.  But don't worry – the serum is completely safe!
  • Try to keep squeezing the ampoule in the same place, to keep the inner tube from being broken into very small pieces.  The serum can stick to the small particles, and may reduce the amount of serum that you're able to get out of the ampoule.
  • You achieve better results if you refrain from drinking dark or acidic beverages (such as coffee or orange juice) during your whitening treatment.
ON-THE-GO Teeth Whitening Pen
Twist the bottom of the pen clockwise (to the right), and keep twisting to release the whitening serum through the tip of the pen into the brush. Keep twisting until the tip is saturated for your first application. With a vertical up-and-down motion, apply a thin layer to all visible surfaces of the teeth, focusing on areas with heavier stains, and away from the gum line. Do not eat, drink, or rinse for 20 minutes after applying. Be sure to replace the pen cap, to keep serum from drying out.

Pre-Whitening Amplifier Gel

Fast and Easy Directions

Step 1: PRIME: PRE-WHITENING AMPLIFIER GEL
Step 2: WHITEN: SMILE WHITENING AMPOULES or A LEADING TEETH WHITENER (sold separately)

Step-by-Step Directions


Brush your teeth, and then use a tissue to blot the surface of teeth dry. Apply a thin, even layer of Pre-Whitening Amplifier Gel to each tooth.

  • PINCH

    Squeeze tube firmly at dotted line.

  • DETACH

    Bend the stick gently back and forth until the seal snaps open. Be sure not to break the stick that goes down into the tube.

  • PULL

    Remove swab from tube.

  • APPLY

    Paint a thin layer of gel onto teeth with swab. Re-dip the swab into tube as necessary to ensure that gel is applied on all tooth surfaces.

*Proceed to Step 2 and apply teeth whitening formula – no waiting necessary.

Whiten your teeth with a teeth whitener or your choice as directed in its instructions for use.  Best results achieved when used with GO SMILE Smile Whitening System.  (SOLD SEPARATELY)



Luxury Toothpaste
Brush your teeth for at least 2 minutes, with AM in the morning and PM at night, to help keep your smile white.

Touch Ups

  • FLIP

    Remove ampoule from paper sleeve, flip it over and reinsert with applicator tip pointing outwards.

  • POP

    With applicator tip pointing down, squeeze until tip is saturated.

  • TOUCH UP

    Apply to each tooth's surface, in a circular motion. Squeeze and apply until empty.

Lip Treatment
Apply to lips as needed to moisturize. Use more frequently when lips are dehydrated or exposed to environmental stress.